4:
Finally, set up the gateway.Please enter the IP address of the
gateway from which this network is reachable (e.g. 192.168.1.1):
192.168.1.1<Enter>
This is the configuration information that has been collected:
SNMP Interface = "Dell_Network_Manager"@192.168.1.10
User Account set up = admin
Password = **********
Management IP address = 192.168.1.100:255.255.255.0
Gateway = 192.168.1.1
5:
If the information is correct, please select (Y) to save the
configuration, and copy to the start-up configuration file.If the
information is incorrect, select (N) to discard configuration and
restart the wizard: [Y/N] y<Enter>
Thank you for using the Dell Easy Setup Wizard.You will now enter
CLI mode.
スタックの管理
マスタースイッチとメンバースイッチ
複数
IP
•
•
•
•
役 果
160
相互
ベ
へ
IP
DHCP
再 成
再 成
SNMP
1
割 当
影響 最小限
内
新
CLI
代
選択