Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
• If the supply cord of this unit becomes damaged, discontinue use immediately
and return the appliance to your nearest authorised Remington® service dealer
for repair or replacement in order to avoid a hazard.
•
Do not allow any part of the appliance touch the face, neck or scalp.
•
Keep the power plug and cord away from heated surfaces.
•
Do not use attachments other than those we supply.
•
Do not use the appliance if it is damaged or malfunctions.
•
Do not twist or kink the cable, or wrap it round the appliance. Check the cord regularly
for any sign damage.
•
This appliance is not intended for commercial or salon use.
•
WARNING: Contains traces of nuts.
PARTS
1. 1000 Watt power handle
2. 50mm thermal mixed bristle brush
3. 40mm thermal soft bristle brush
4. Root boost attachment
5. 2-way rotation switch
6. Temperature setting switch
INSTRUCTIONS FOR USE
•
Wash and condition your hair as normal.
•
Squeeze out excess moisture with a towel and comb through.
•
Select your attachment before you turn on the appliance.
To Secure Attachments to the Handle
•
Align the arrow symbols (d) on the attachment locking ring with the centre of the
channels around the edge of the power handle locking ring and push together.
•
Turn the attachment locking ring firmly clockwise in the direction of the lock arrow (+
L) to secure the power handle and the attachment together.
•
Dry length and roots partially prior to styling.
Tip: for best results aim for 80% dry hair.
•
Section the hair prior to styling. Style the lower layers first.
•
Plug the product into the mains power supply
•
Start styling on lower temperature first. Select the appropriate temperature for your
hair type using the temperature setting switch on the base of th styler.
•
To increase the temperature turn the temperature setting switch to position '1' for low
heat, '2' for high heat and position 'C' for the cool setting.
NOTE: The Brush attachments will only start rotating when a temperature setting has
been selected.
4
7. Attachment locking ring
8. Power handle locking ring
9. Cool setting
10. Inlet grille
11. Hanging loop
12. 3m swivel cord
Publicidad
Tabla de contenido
