Remington MB4850 Manual De Instrucciones página 7

ENGLISH
• The appliance must be disconnected from the supply mains when removing
the battery.
• Remove 4 screws from the bottom housing. Using a small screwdriver, pry off
the upper housing.
• Cut the red and black wires to disconnect the motor and PCBA, then take out
the battery holder bracket.
• Using a small screwdriver, pry off the switch lever on the battery holder
bracket.
• Remove 2 screws and then remove the battery holder bracket.
• Pull out the PCBA from the battery holder bracket. Cut the wirings which
connect the batteries and remove the batteries.
• Dispose of the batteries carefully.
H ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous
substances in electrical and electronic goods, appliances marked with
this symbol must not be disposed of with unsorted municipal waste, but
recovered, reused or recycled.
7