Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Important Safety Instructions:
Important: Read these instructions thoroughly before using.
When assembling, do not plug in until directed in Operating Instructions.
WARNING
– To reduce the risk of burns, fire, electric shock
serious injury or death:
• Before moving the product, disconnect the electrical plug from the wall outlet and secure the
mechanism to prevent unexpected opening or movement. Never move the product by the
mechanism, legrest, handle, reclining back, or swivel base.
• The Power Rocking Recliner with Headrest and Lumbar and Power Wall Recliner with Headrest
and Lumbar units are intended for a single occupant not exceeding 300 pounds per seat. Do
not operate an individual seat with more than one occupant in or on any part of the individual seat.
• Review the online Operating Instructions manual with anyone who may operate the product,
such as visitors.
NOTICE
-- To reduce the risk of product damage:
• To prevent damage to the power supply, do not plug in until instructed.
• Never operate the unit except when it is on its base in the upright position.
• Gently press the buttons during operation and avoid hitting the buttons with pointed or hard objects.
• After 1 minute of continuous operation, allow the system to rest for 9 minutes.
• Only operate when no foreign object or obstacle will impede, interfere, or otherwise damage the
unit in any of its positions or while in motion.
Save These Instructions
Regulatory Compliance Statements for
Furniture with Wireless Hand Wand and Bluetooth
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy, and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
This device complies with Industry Canada's license-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type
and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio
interference to other users, the antenna type and its gain must be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
Publicidad
Tabla de contenido
