Section 5 - Installation; Securing The Neck - Tregaskiss MIG 600 Manual Del Propietário

5-1 Securing the Neck

1. Align dowel on neck with the hole on the docking body.
2. Press the neck into place.
3. Using the spanner wrench provided, firmly tighten the neck nut
onto the threaded body (see Figure 5-A
4. Once neck is firmly seated in place, ensure the set screw is
seated on the flat of the copper neck tube and tighten set screw.
Torque to 70 in-lbs (see Figure 5-B
SECTION 5 — INSTALLATION
Figure 5-A
Figure 5-B
M081-1.0 12