INSTRUCTIONS FOR USE
To reduce the risk of electric shock, this appliance has a polarized plug (one
blade is wider than the other). This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician to install the proper outlet. DO
NOT change the plug in any way.
1. This unit is powered by and comes equipped with a UL approved
cord. ALWAYS
make sure the unit is set to the "OFF" position before inserting
the plug into a 120-volt electrical outlet.
2. Massage: To activate Massage function, slide the bottom switch to "ON". Slide the switch
forward (A) to increase massage intensity.
Massage + Heat: Once massage function is on, press the HEAT button (B) to
activate Heat
NOTE:
The Heat function can only be activated when the Massage function is in use.
NOTE: The Heat function will only activate when using the Thermal Heat attachment.
Never use the Heat Attachment if the housing is cracked or broken, or if the metal plate is
loose, bent or separated from housing.
NOTE:
To eliminate the risk of being burned, do not use the heat continuously for more than 15
minutes. Do not use heat or cold massage if you have sensitive skin, poor circulation, discolored
areas, burned or inflamed skin, or where skin eruptions or sores are present. Heat and cold massage
should be pleasant and comfortable. Should pain or discomfort result, discontinue use and consult
your physician.
4
B
A
High
Off/Low