Setting The Date And Time - Brandt CPN-806 Manual Del Usuario

TURNING ON OR OFF THE PHOTO FRAME
To turn on the photo frame, connect one end of the
supplied power adapter to the
frame, and plug the power adapter into the mains socket.
The display will briefly show the opening image.
To turn off the photo frame, press
frame will be turned off. Disconnect the power adapter
from the photo frame and mains socket.

SETTING THE DATE AND TIME

1. Press to show the main screen.
2. Repeatedly press
displayed.
3. Repeatedly press
• The first value (Year) will become red.
4. Repeatedly press
• The second value (Month) will become red.
5. Repeatedly press
• The third value (Date) will become red.
6. Repeatedly press
7. Repeatedly press
• The hour digits will become red.
8. Repeatedly press
• The minute digits will become red.
9. Repeatedly press
10. When the date and time have been set, press
CONNECTING TO PC AND USING COPY FUNCTION
The photo frame has built-in memory.
1. Connect the photo frame to PC using a USB cable.
2. When connected correctly, the screen will show 'USB device is connecting' .
3. You can copy and pasta photos between PC and photo frame.
jack on the photo
and the photo
/ to select the setting option then press
/ to select the Date item then press
/ to set the year and press
/ to set the month and press
/ to set the date and press
until the Time item is selected and press
/ to set the hours and press
/ to set the minutes and press
.
to confirm.
to confirm.
to confirm.
.
to confirm.
to confirm.
to return to the main screen.
EN-32
. The Setup menu will be