Brandson Equipment 303503 Manual Del Usuario página 49

If you hear a clear click, it means that the blade is properly mounted.
If you wish to replace the hedge trimming blade with the grass trimming
blade, repeat the steps.
10. Cleaning and Care
• Keep all safety guards, vents and the motor housing free from dirt
and dust as far as possible. Wipe the device with a clean cloth or
blow it clean using low-pressure compressed air.
• It is advisable to clean the device immediately after each use.
• Clean the device regularly with a damp cloth and some soft soap. Do
not use cleaning agents or solvents; these could damage the plastic
parts of the device. Ensure that water does not get into the device.
• A few drops of oil (e.g. sewing machine oil) improves the cutting per-
formance of the blades, but never apply grease to the blades.
• In order to ensure that cutting is always accurate, it is also impor-
tant to remove grass and dirt residues between the top and bottom
blades.
English
49