Care And Maintenance; Exchanging The Exhaust Filter - NSS PACER 214 UE Operación Manual

PACER 214 UE / 218 UE
Caution: Before any maintenance work takes place, pull the
power plug out of the socket.
Check main cable, connection cable and hoses for damage
before putting the unit into operation for the first time.
5.1 Exchanging the paper filter bag <Figure 7>
• Depress the cover fastener and remove cover.
• Push the filter bag catch to the left until it is possible to pull
the filter bag off the connection piece.
Assembly:
• Insert the narrow end of the support card into the holder.
• Push the filter bag catch to the left and guide the support
card upwards over the connection piece until it slots in.
• Replace the cover.
Please note: If the cover does not close, check whether the
filter bag has been inserted properly.
5.2 Exchanging the safety filter <Figure 8>
After exchanging the filter bag approximately 20 times,
exchange safety filter.
• Press cover fastener and remove cover.
• Lift the red locking device and pull out the safety filter.
Assembly:
• Lift the red locking device and insert the safety filter.
Please note: If the cover does not close, check whether the
filter bag has been inserted properly.
5.3 Exchanging the exhaust filter <Figure 9>
After exchanging the filter bag approximately 20 times,
exchange the exhaust filter.
• Push the exhaust filter off the housing and withdraw.
Assembly:
• Insert new filter.
5.4 Exchanging the brush strip <Figure 10>
• Remove power cable from electrical outlet.
• Unscrew the brush head cover. Turn the brush so that the
brush strip can be pushed or pulled through the opening.
Assembly:
• Push home the new brush strip and screw the cover on
again.

5. Care and maintenance

OPERATION MANUAL
Figure 7
Figure 8
Figure 9
Figure 10
9