Publicidad
2a
3
5
7
9
2b
4
6
8
10
QUICK CONNECT INSTALLATION
1. Shut off water supply.
2. Mark 2" section of cold water line and
remove.
3. Deburr, and mark insertion depth (0.95")
on both ends of copper pipe.
4. Push slip end of the tee onto one end of
the copper pipe.
5. Use the demount clip to retract slip
tee on to the other end of the pipe and
ensure proper insertion depth.
6. Push supply stop to the second groove
on the tee's tube end.
7. Mark PEX tube (0.81") and push into
fixture stop.
8. Thread fitting onto ice maker valve;
tighten.
9. Mark PEX tube (0.81") and push into
fitting.
10. Turn water supply on and check for leaks.
Cut. Push. Done.
Fixture connections are easy with
SharkBite
.
®
Publicidad
