Tabla De Contenido; Battery Installation; Install The Batteries - GE RM94940 Manual De Instrucciones

94940 Revised Size 10/18/02
Thank you for purchasing the GE Universal Remote
Control. This product is designed to provide years of
service operating a wide variety of video and audio
equipment.
Please retain this guide for future reference.
Table of Contents
Install the Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Button Description . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3
Learning Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Clearing a Learned Function . . . . . . . . . . . . . . . . . . . . .5
Clearing All Learned Buttons . . . . . . . . . . . . . . . . . . . .5
Programming for TV . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Programming for VCR . . . . . . . . . . . . . . . . . . . . . . . . . .7
Programming For DVD . . . . . . . . . . . . . . . . . . . . . . . . .8
Programming For DBS System . . . . . . . . . . . . . . . . . . .9
Programming For Cable . . . . . . . . . . . . . . . . . . . . . . .10
Programming For CD . . . . . . . . . . . . . . . . . . . . . . . . .11
Programming For AUX 1 or AUX 2 . . . . . . . . . . . . . .12
Sleep Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Programming With Code Search . . . . . . . . . . . . . . . .14
Identifying Codes For Your Remote . . . . . . . . . . . . . .14
Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . .15-16
Device Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36-39
This Universal Remote Control is already programmed
for most GE, RCA and ProScan TVs, VCRs, DBS
Systems, DVD Players, and Audio/Video Receivers.
NOTE: For users of GE, RCA and ProScan DBS
Products, older DBS models require that the DISPLAY
Button on this remote be used to make program selec-
tions. Use the SELECT Button for making program
selections on newer GE, RCAand ProScan DBS models.

Battery Installation

Your Universal Remote Control requires 2 AAA alka-
line batteries.
To install the batteries:
1. Turn the remote over and push down on the cover
and slide it off.
2. Insert the batteries, matching the batteries to the (+)
mark inside the battery case.
3. Slide the battery cover back into place.
NOTE: Programmed codes will remain in memory for
a short period of time allowing for battery replacement.
If batteries have been dead for a prolonged period of
time, reprogramming may be required.
12:22 PM Page 2
1