Package Contents; Assembling The Front Speakers - Yamaha NS-PA40 Manual De Instrucciones

• Make sure that all parts are included in the package.
• Pay attention not to drop the bases when you take them out of the box.
Surround speaker (NS-B40) x2
Center speaker
(NS-C40) x1
Non-skid pads (24 pcs.) x1
For the center and surround speakers.
(Including 12 spare non-skid pads.)
When placing the speakers on a flat surface, affix the
included non-skid pads to the corners of the speaker
undersides, as shown. The pads will prevent the speaker
from moving around.
Caution
• Assemble the speakers on top of soft material, such as a carpet, on a level surface.
• Do not grab the grilles on the front panel of the speakers while you are taking them out of the package box or
assembling them. Otherwise, the grilles may be crushed.
• Install the speakers using the specified screws supplied in the package.
• Keep the screws out of reach of children to prevent them from accidentally swallowing a screw.
• Tighten the screws firmly so that the front speaker never gets shaky.
• Do not insert your fingers into any gaps between movable surfaces. Otherwise, you may pinch and injure your
fingers.
• You cannot use only the speaker top. Be sure to assemble the speaker top, bottom and base.
Note
Have a Phillips (+) screwdriver (with a shaft length of 80 mm (3-1/8")
or more) ready to use during assembly.
1
En

Package contents

Subwoofer (NS-SW40) x1
Non-skid pad

Assembling the front speakers

Front speaker (NS-F40) x2
Screw x10 (For the front speakers)
Subwoofer cable 5 m (16 ft.) x1
Speaker cable 24.5 m (80 ft.) x1
To be cut into 5 lengths for the front,
center, and surround speakers.
Take care to prevent injury when
preparing the cables.
Shaft length
80 mm (3-1/8") or more
Top
Bottom
Base