Publicidad
Idiomas disponibles
Idiomas disponibles
Instructions
Add-On Faucet Installation:
1. After installing the base faucet per its instructions, apply Tefl on tape,
Loctite, or pipe joint compound to threads of add-on faucet inlet nipple.
Thread add-on faucet into outlet hole of base faucet body until joint is
secure and add-on faucet body faces desired direction.
Swing Nozzle/Swivel Gooseneck Installation:
Note: Silicon grease is applied to the interior swivel cavity of the body prior to
shipment. No additional grease is required.
2. Remove vinyl cap from body outlet.
3. Insert nozzle/gooseneck into body cavity.
4. Tighten swivel lock nut using 1-5/16" wrench.
Pre-Rinse Installation:
5. After installation of the add-on faucet per steps 1 through 4, apply Tefl on
tape, Loctite, or pipe thread compound on the bottom of the riser. Slide
fi nger hook onto riser before riser installation. While holding add-on faucet
body still, thread riser into outlet hole of the add-on faucet body until joint
is secured.
6. Install wall bracket(s) and fi nger hook according to instructions
accompanying the pre-rinse unit.
7. Rotate spring and hose assembly until they face desired direction.
8. Turn on water supplies and check for leaks.
3
Publicidad
