Door Board Overview - LiftMaster myQ Business Smart Video Intercom M CAPXM Manual De Instalación

INTRODUCTION

Door Board Overview

INTRODUCTION
The CAPXM has a combination of access control inputs/outputs on the Door Board that work in conjunction to control up to 2
access points.
INTRODUCTION
INTRODUCTION
INTRODUCTION
INPUT/OUTPUT
Relay Output 1
Relay Output 2
Wiegand Output 1
Wiegand Output 2
Supervised Input 1
Supervised Input 2
NOTE: Only the 26-bit Wiegand protocol is compatible in UL installations.
PRE-INSTALL
PRE-INSTALL
DOOR BOARD
PRIMARY
RELAY
PRE-INSTALL
AUXILIARY
WIEGAND
RELAY
OUTPUT
PRE-INSTALL
PRE-INSTALL
AUXILIARY
RELAY
PRIMARY
RELAY
USED FOR
Gated Operator, Door Strikes, Maglocks, Lights (for control-only power to be provided by external
power supply), Alarm Shunt
Standard 26-bit, 30-bit Wiegand, HID 37-bit with Facility Code, Transcore 37-bit, 32-bit MiFare
Closed Door Sensor (Supervised EOL or unsupervised), Closed Limit Gate Sensor (Supervised EOL
or unsupervised), Open Limit Gate Sensor (Supervised EOL or unsupervised)
INSTALL
INSTALL
Door 1
INSTALL
STATUS
REQUEST
TO EXIT
INSTALL
WIEGAND
INPUT
WIEGAND
INSTALL
INPUT
STATUS
REQUEST
TO EXIT
Door 2
6
NETWORK ACCESS CONTROL
NETWORK ACCESS CONTROL
NETWORK ACCESS CONTROL
NETWORK ACCESS CONTROL
NETWORK ACCESS CONTROL
See page 17 for wiring diagram.