Tabla de contenido
Publicidad
MAINTENANCE AND CLEANING
The device must be cleaned with a moist towel, and no chemical products must
be used.
PRODUCT DISPOSAL
WITHDRAWAL OF THE BATTERY
The appliance must be disconnected from the mains to remove the battery.
Make sure the appliance is completely discharged.
First remove the tank cap, grille and blades.
Remove the two peripheral screws that will display, disengage the motor and
access the inside of the product.
Then remove the two screws located inside the appliance and separate the two
halves of the appliance. Then access the batteries by removing the two screws
from the bottom half of the product and remove the PCB. Lever with a flathead
screwdriver just below the on / off switch to facilitate removal of the PCB from the
compartment. Once the internal circuitry is removed, cut or de-solder the metal
plates that connect the batteries to the PCB.
The battery must be removed from the device before being discarded. The battery
must be disposed of safely.
10
This product complies with the European Directive 2012/19 /
EU on electrical and electronic equipment, identified as WEEE
(waste electrical and electronic equipment), which provides
the legal framework applicable in the European Union for
the disposal and reuse of waste electrical and electronic
appliances. Do not dispose of this product into the bin. Go to
your nearest electrical and electronic waste collection point.
The product may contain batteries. Remove them before
disposing of the product and dispose in special containers
approved for this purpose.
We hope that this product will be to your satisfaction.
Publicidad
Tabla de contenido
