Part Description; How To Use; Change Direction; Charging - LG HBM-900 Manual Del Usuario

Part Description

Front
Mics
Mic
Back

How to use

Change direction

4
Call Button/ LED Indicator
(Touch Sensor)
PWR Switch
Volume Control (Circulation)
Speaker
Charging Port

Charging

- Remove the cover on the charging port and connect the charger.
- When the charger is connected, with the power on or off, the Headset
will turn off automatically, and cannot be used.
- While charging, the LED indicator will show a solid blue light.
- The buttons will not function while the device is charging.
- It takes 2 hours to fully charge the Headset.
- When charging is complete, the LED indicator will turn off.

Low battery

- A low battery tone will play once every 30 seconds.
- If the battery is not charged, the Headset will turn off.

Power on

- Move the PWR switch from OFF position to ON position.
� The power will turn on and a booting tone will play.

Power off

- Move the PWR switch from ON position to OFF position.
�A shutdown tone will play, the Bluetooth link will disconnect, and the
power will turn off.

Button hold

- Button Hold mode prevents any button on the HBM-900 from being
pressed unintentionally.
- Slide the PWR switch to the HOLD position to place the headset in
Hold mode.
- Slide the PWR switch to the ON position to turn off Hold mode.
- If you press any button on the headset, while it is in Button Hold mode,
you will hear three distinct beeps and the LED will blink three times to
alert you that the headset is in Hold Mode.
- When you slide the PWR switch to the OFF position, the Headset will
turn off, and Button Hold mode will turn off automatically.
- Button Hold mode cannot be activated during a call.
* NOTE : If there is an incoming call, while the headset is in Hold Mode, Hold
will be deactivated, and you are able to answer the call using the HBM-900
Call Button. Hold will be deactivated for the duration of the call. Five seconds
after the call is ended, the headset will automatically return to Hold Mode.
* NOTE : Please be careful not to end the call by pressing the call button
during hold button process.
How to use
5