Crosley CR1704A-WM Manual De Instrucciones página 3

Jukebox Unpacking and Set-Up
Remove and save all packing materials from jukebox for warranty purposes.
Power Source and Initial Set-Up
1. Remove the AC power adapter and cord from the packing material and connect the
AC power cord to the AC adapter.
2. Plug the small end of the adapter into the DC jack on the back of the jukebox.
3. Connect the AC adapter cord into the wall socket.
4. Push the toggle switch on the rear of the jukebox to "ON". This toggle switch can
remain activated in the "ON" position once the jukebox is in its final position.
5. Ensure the SPEAKER switch is moved the to the INT (Internal) setting unless you
intend to attach your own set of external speakers. See details contained in
manual regarding the External Speaker Option if you intend to utilize external
speakers.
Antenna
1. Unwind the FM Antenna supplied and connect it to the FM Antenna jack on the
rear of the jukebox.
2. Position the antenna where you can obtain optimum FM reception.
Note: If you have trouble tuning into an FM station, you may have to re-position the antenna
for better reception until it is clear with no interference.
Set-Up – Rear Panel Layout & Connections
3