1. Place the weather cap
2. Fit the bottom of your device into the cradle
3. Tilt the device back until it snaps into place.
4. Using the security screw tool, tighten the security screw
mount.
NOTE: If reflected light or glare makes the device display difficult to see, apply
an anti-glare screen protector to the screen.
removing Your Montana from the Mount
1. Loosen the security screw.
2. Press the button on the side of the mount to release
the device.
3. Lift out the device.
4. Place the weather cap
AMPS Rugged Mount Instructions
in the storage area on the mount.
➊
➊
➋
on the cradle.
➊
➌
.
➋
on the top of the
➌
➊
EN-5