Osram AirZing PRO 5030 UNIV Manual De Instalación Y Seguridad página 5

AirZing™ PRO 5030 UNIV
Make sure the circuit breaker that will supply power to the fixture is turned off.
Fixture can be either wall or ceiling mounted. Recommended installation height is
between 8 to 13ft.
1. Loosen the thumb screws to remove the
cover plate.
3. Drill holes at the predefined mounting
positions, and embed wall anchors
for screws.
5. Connect the power
cable to the terminals.
7. Mount the cover plate on the casing
and fix the cover plate with the
fastening screws.
9. Then rotate the lamp 90° to
secure it in place.
5
2. Take the lampholders from the casing
and fix them into the grooves at each end
of the casing.
4. Mount the fixture on the wall or ceiling, aligning
the mounting holes to the wall anchors
and securing with the
anchoring screws.
6. Plug the grounding wire
on the cover plate
into the casing
as shown.
8. Mount the G30T8/OF ultraviolet lamp
provided into the lampholder in the
direction shown below.
For assistance with assembly or
installation, parts and customer service,
phone (888) 677-2627 or email us at
piacustsrv@osram.com.