Tools and Materials
Before You Begin
WARNING: Risk of serious injury. Damage prior to installation can result in glass shattering.
Inspect the glass and all parts for damage before installation.
WARNING: Risk of serious injury. Improper installation can result in glass shattering. Follow all
installation instructions.
WARNING: Risk of serious injury. Do not cut tempered glass. Tempered glass will shatter if cut.
WARNING: Risk of serious injury. Shower door and side panels can shatter. Regularly inspect the
glass and all parts for damage, missing, or loose parts.
WARNING: Risk of serious injury. Always wear safety glasses while cutting and drilling.
CAUTION: Risk of personal injury. Tempered glass should not contact hard surfaces or it may
shatter. Do not touch the edge of the tempered glass panel with tools or any hard objects.
IMPORTANT! Leave this manual for the end user. Read these instructions before installing or using this
product.
IMPORTANT! This door is designed to accommodate walls that are less than 3/8" (10 mm) out of plumb.
Verify the area the door will be attached to is within 3/8" (10 mm) of plumb. The door may not function
properly if the wall is more than 3/8" (10 mm) out of plumb.
Before starting the installation, lay out and identify all of the parts. Inspect them for damage.
Place a drop cloth in the bottom of your shower to cover your drain and ease clean-up.
Closely follow the manufacturer's instructions pertaining to the sealant application on the door.
Sealing areas other than those shown may cause leaking.
Two people should perform this installation.
If your model includes a return panel, follow the return panel instructions and consult these
instructions as needed.
1280800-2-B
Caulk Gun
100% Silicone Sealant
2
Included:
• 3 mm and 6 mm Drill Bit
• 2 mm, 2.5 mm and 5 mm
Hex Wrench
Kohler Co.