Led Indicators - PUREGEAR pureboom Manual Del Usuario

Operating PureBoom
To... Button
Turn on/off headphones
Start Bluetooth pairing
Play/Pause/Call
Volume up/down /
Go to next/previous track /
Answer/end call
Reject an incoming call

LED Indicators

• Red and blue LEDs flash: Headphones are in pairing mode.
• Red LED: Power is running low, time to charge.
• Blue LED gradually flashes: PureBoom headphones in use.
8
Press
and hold 4 secs
When
headphones
turned off, press
and hold 6 sec
x1
x1
...and hold
Note: Music playback
x1
is paused during call
Hold until call ends
functions and resumes
when the call ends.
Use with the Aux Cable
Alternatively connect the PureBoom
using the supplied Aux cable by plugging
the cable directly into the Aux port
located on the bottom left side
of your headphones.
Convenient Storage
To save space, the PureBoom
can be folded inward and conveniently
placed in the pouch.
Specifications:
Driver: 40mm per ear cup
Bluetooth 4.0
Frequency: 20Hz-20KHz
Battery Capacity: 3.7V/500mA
En
Aux Port
9