Phantom PHOTOBIO T Top light Manual Del Usuario página 6

PHOTOBIO•T driver is designed to be mounted either attached to the fixture or mounted
remotely. To attach the driver on the fixture, follow the steps below:
Type A: Attaching the driver to light fixtures
Step 1. Driver installation
Take out lighting fixture (Part A) and driver (Part B) out of box with care. Screw tight the driver
fasteners (part D). This step is important to secure the driver in place, see Fig. 2.
Step 2. Connecting driver to lighting fixture
Plug in the DC cables of lighting fixture to driver's DC connector, see Fig. 3. Spin the orange cap
till tight. This step can be omitted for the first time, as the DC connectors and DC cables are
connected by default out of box.
6 www.phantombio.com
USER MANUAL
Fig. 2
Fig. 3