Dell DRAC 4/P Instalación página 3

Figure 2. DRAC 4/P Video and NIC Connector Locations
card video connector
card NIC connector
10
Configure the DRAC 4/P card:
During boot, the DRAC 4/P <Ctrl><d> setup program option appears. Press
a
<Ctrl><d> and enter the DRAC 4/P setup program.
Configure the DRAC 4/P as explained in the Dell Remote Access Controller 4 User's Guide.
b
Exit the DRAC 4/P setup program. The system then continues its boot.
c
If you are running a Microsoft
several new DRAC 4/P-related devices as it starts. The drivers for those devices are located in
one of the following paths under the Systems Management group on the Dell OpenManage
Server Assistant CD:
Dell: Remote Access Controller - DRAC 4/P (Driver) Windows 2003 DRAC4 Drivers
(Self Extracting Zip) or
Dell: Remote Access Controller - DRAC 4/P (Driver) Windows 2000 DRAC4 Drivers
(Self Extracting Zip)
NOTE:
The screen may blink several times as Windows starts and the Hardware Wizard discovers
the new DRAC 4/P display adapter.
®
NOTE:
Novell NetWare
® ®
Windows operating system, the operating system detects
® ®
and Red Hat Linux operating systems use native drivers.