Tripp-Lite PINVRM Guia De Instalacion página 4

Installation
Using the center-to-center spacing of the mounting holes, mark the locations for
3
installation.
Secure the remote to its permanent location with user-supplied hardware. Tighten by
4
hand to reduce the possibility of cracking the remote module at its mounting points.
Connect the remote's wired connector to the inverter's RJ11 port labeled "REMOTE".
5
6
Set the inverter's main power switch to the REMOTE (||) position.
Test the connection and operation by pressing the ON/OFF until the green status LED
7
shows on the remote module.
To operate your power inverter using the PINVRM Remote Manual, please refer to your
power inverter's Owner's Manual.
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
18-08-507-9338AF.indb 4
4
9/24/2018 12:00:38 PM