Mychanic 52608 Manual De Instrucciones página 9

Possible Symptoms
Jack will Saddle
not lift at lowers
its weight under
capacity load
X X
X X
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND
ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE
MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY
OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY
REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY
Pump Saddle
stroke will not
feels lift all
spongy the way
X X
Handle Fluid
moves up leaking
when jack from fill
is under plug
load
X
X
Probable Solution
Make certain that the jack is
not supporting a load while
attempting a solution
Check that release valve is fully
closed.
Jack may require bleeding - see
instructions above.
Valves may be blocked and
may not close fully. To flush
the valves:
1. Lower the saddle and
securely close the release valve.
2. Manually lift the saddle
several inches.
3. Open the release valve by
turning the handle counter-
clockwise and forcing the
saddle down as quickly as
possible.
Jack may be low on hydraulic
fluid. Check fluid level and refill
if needed –- see instructions
above.
Jack may require bleeding --
see instructions above.
Unit may have too much hy-
draulic fluid inside. Check fluid
level and adjust if needed – see
instructions above.
9