Thera Care 24-810 Manual De Instrucciones página 9

HOW TO USE YOUR HEATING PAD
MOIST HEAT OPTION
1. Saturate the SPONGE only with
warm water. Do not use any gels,
solvents or other liquid to saturate
the sponge.
2. Lightly wring out excess water so
that the sponge is not dripping.
3. Place the sponge on the PVC pad
and insert the both pieces fully into the cloth cover;
the cord and control should extend fully outside of
the cover.
4. Take care that the pad is flat and not folded or
bunched within the cover.
5. Dry hands thoroughly and plug the product into a
standard 120-volt AC electrical outlet.
6. Position the heating pad for desired treatment.
The pad should always be positioned on top
of—NOT UNDERNEATH—the treatment site as the
temperature can increase to uncomfortable levels
when the heat is trapped.
Press the ON/OFF button to turn the heating pad
7.
on; the power light will illuminate.
8. Monitor your comfort level and discontinue use if
heat is uncomfortable.
9. The heating pad will turn off after approximately 2
hours. Always unplug the device when not in use.
ENGLISH • 9