Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Instructions
BEFORE YOU BEGIN
Read these instructions completely and
carefully.
IMPORTANT
•
governing codes and ordinances. Save these
instructions for local inspector's use.
• Note to Installer – Be sure to leave these
instructions with the Consumer.
• Note to Consumer – Keep these instructions
for future reference.
• Skill level – Installation of this appliance
requires basic mechanical skills.
• Completion time – Refrigerator Installation
• Proper installation is the responsibility of the
installer.
• Product failure due to improper installation is
not covered under the Warranty.
PREPARATION
MOVING THE REFRIGERATOR INDOORS
If the refrigerator will not fit through a
doorway, the refrigerator door and freezer
drawer or door can be removed.
• To remove the refrigerator doors, see
Removing French Doors section.
• To remove the freezer drawer, see the
Removing the Freezer Drawer section.
WATER SUPPLY TO THE ICEMAKER AND
DISPENSER
If the refrigerator has an icemaker, it will
have to be connected to a cold water line. A
GE Appliances water supply kit (containing
tubing, shutoff valve, fittings and instructions)
is available at extra cost from your dealer, by
visiting GEAppliances.com or from Parts and
Accessories, 877.959.8688.
16
— Observe all
20 minutes
Water Line Installation
30 minutes
Refrigerator
TOOLS YOU MAY NEED
Adjustable Wrench
1/4" Outer Diameter
Compression Nut
and Ferrule (sleeve)
(icemaker models only)
3/32", 1/8" & 3/16" Allen
Wrenches
1/8" Drill Bit and
Electric or Hand Drill
Pencil
Wire Cutters
Torx T20, Driver
⅜"
⅝"
and
Socket
Ratchet/Driver
Phillips-Head Screwdriver
Tape Measure
1/4" Nut Driver
Level
49-1000107 Rev. 0
Publicidad
Capítulos
Tabla de contenido
