Silverline 265438 Manual Del Usario página 7

265438
5. Hold the Trigger and release the Lock On Switch to disengage, then release the
Trigger to stop
6. To switch off, depress the On/Off Switch
7. Allow the machine to cool fully before re-filling
8. To finish using the steam cleaner, switch off the power and unplug from the
mains. Release all steam using the Trigger. Allow to cool, pour out the water
and store the steam cleaner
Notes
• It is normal for the Heating Indicator (4) to regularly illuminate during use
to restore steam pressure. Wait until the Heating Indicator turns off before
continuing use. This will take approximately 40 seconds
• The steam cleaner body will become very hot in use. Move the steam cleaner by
using the Carrying Handle (8). Do not use the Hose (11) to pull the steam cleaner
• When using the Extension Tubes each time you stop operating the Trigger some
water may cool in the Extension Tubes and be released as water when you start
operating the Trigger again. It may be necessary to keep a cloth handy just to
capture this water before steam is restored
• The Pressurised Tank Cap (5) cannot be unscrewed when the steam cleaner is
pressurised. Do not attempt to unscrew as it may be damaged if forced
• Do not store the cleaner where it will be exposed to freezing temperatures
General cleaning
1. Apply steam, using appropriate accessories (see Application)
2. Once the dirt has been loosened it can be wiped away with a household cloth
(Note: metal surfaces may become very hot whilst being steam cleaned)
Cleaning clothes
1. Use the Large Brush (12) with a cloth fitted
2. Hang clothes, and brush the steam back and forward gently over the clothes
Cleaning windows
• Do not use the steam cleaner on very cold glass
• If the windows are very dirty, clean with the Large Brush with a cloth fitted first.
You can then use the Squeegee (13)
1. Use the Squeegee, Accessory Connector (19) and one or both Extension Tubes
(22) if required
2. Hold the Squeegee against the top of the window, press the Trigger (9) and
move the squeegee down the window
3. After cleaning, use a clean cloth to remove the dirt from the squeegee blade
Applications
As general guidance, this steam cleaner is suitable for cleaning the following
surfaces and materials. If in any doubt, always test a small inconspicuous area of
the surface first.
Large surfaces: use the Large Brush (12)
• Carpets
• Tiled, parquet, stone and linoleum floors
• Tiled walls
• Roller shutters, guillotine windows
Small surfaces: use the Small Brush (16), Detail Brush (17) or Jet Nozzle (15)
• Small spaces in radiators
• Small areas of tiling
• Door and window frames
• Shutters
Glass surfaces: use the Squeegee (13)
• Windows and glass walls
• Glass doors
• Mirrors
Upholstery: use the Large Brush (12) with fitted cloth
• Curtains, carpets and mats
• Upholstered furniture (sofas, armchairs) – but see below
CAUTION: When cleaning furniture and other delicate surfaces
• Never clean with the direct jet
• Always fit a cloth to the Large Brush
• When you clean, do not exert pressure with the brush
1500W Steam Cleaning System
Accessories
• Contact your Silverline stockist for additional or replacement accessories for
this product
• Only use accessories approved and designed for this product
Maintenance
WARNING: Always disconnect from power supply before carrying out any
maintenance/cleaning.
WARNING: This steam cleaner has no user serviceable internal parts.
General inspection
• Regularly check that all the fixing screws are tight
• Inspect the supply cord of the tool, prior to each use, for damage or wear.
Repairs should be carried out by an authorised Silverline service centre. This
advice also applies to extension cords used with this tool
Cleaning
• Keep your tool clean at all times. Dirt and dust will cause internal parts to wear
quickly, and shorten the machine's service life. Clean the body of your machine
with a soft brush, or dry cloth. If available, use clean, dry, compressed air to
blow through the ventilation holes
• Clean the tool casing with a soft damp cloth using a mild detergent. Do not use
alcohol, petrol or strong cleaning agents
• Never use caustic agents to clean plastic parts
Descaling
• To prevent the build-up of lime scale deposits in the tank use a proprietary
descaler solution suitable for a steam cleaner or a white vinegar solution. The
frequency will depend on the hardness level of your water supply. A very light
deposit of lime scale can be removed by pouring a small amount of descaler
solution into the tank and swilling the solution around the tank and pouring
out. Then rinse the tank with clean water. Frequent descaling is recommended
to keep the steam cleaner in good operating condition. A frequency of once
a month is recommended for hard water areas. In hard water areas it is
recommended to empty the tank after use to help reduce the build-up of scale.
Lubrication
• Slightly lubricate all moving parts at regular intervals with a suitable spray
lubricant
Brushes
• Over time the carbon brushes inside the motor may become worn
• Excessively worn brushes may cause loss of power, intermittent failure, or
visible sparking
• If you suspect that the brushes may be worn, have them replaced at an
authorised Silverline service centre
Storage
• Store this tool carefully in a secure, dry place out of the reach of children
Disposal
Always adhere to national regulations when disposing of electrical products that
are no longer functional and are not viable for repair
• Do not dispose of waste electrical and electronic equipment, with household
waste
• Contact your local waste disposal authority for information on the correct way to
dispose of waste electrical and electronic equipment
www.silverlinetools.com
7