DRILL DOCTOR 500X Guia Del Usuario página 32

Reversing or Replacing Your Diamond
Sharpening Wheel
1.
Wheel Access Cover
2.
3.
4.
30
Unplug your Drill
Doctor
machine is cool, then
remove wheel cover.
Use wrench supplied with
your Drill Doctor
sharpening wheel in place.
With Phillips-head screwdriv-
er, remove the two screws
and wheel retainer.
Remove worn wheel by twist-
ing slightly and lifting wheel
off shaft. Install new wheel
and reinstall wheel retainer
and screws. Don't over-tight-
en mounting screws. Remove
the wrench and replace the
Wheel Access Cover before
turning on the machine.
www.drilldoctor.com
, make sure
®
to lock
®