Getting Started; Charging The Battery - MioWork L130 Serie Guia De Inicio Rapido

en

Getting started

Charging the battery

When charging the battery for the very first time, you should charge it for at least 8 hours (using the
AC charger) with your device turned off.
To charge the battery, plug the supplied power cable into the Power jack (
and the mains power charger into the power socket* (
device lights up to indicate the battery charge status:
Red – battery fault.
* The plug type varies with the region of your purchase.
CAUTION! For optimal performance of the lithium battery, note the following:
• Do not charge the battery where the temperature is high (e.g. in direct sunlight). The battery
will stop charging when the ambient temperature is less than -3ºC (26.6ºF) or more than 55ºC
(131ºF). The device will operate when the ambient temperature is between -10ºC (14ºF) and
50ºC (122ºF).
• Recharge the battery when it is nearly discharged. When recharging, make sure that the battery
is fully charged. Doing so can extend the battery life.
• If the device has not been used for over a month or if you find the discharge/recharge time has
been shortened, be sure to fully discharge the battery first before recharging it. You are also
advised to fully discharge and recharge the battery once every 1~2 months.
• Failure to follow the battery usage instructions can cause damage to your device, battery and
even bodily injury or property damage and will void the warranty.
2
) on the left of the device
1
). While charging, the LED indicator on the
2
Green – battery full; Amber – battery charging;