Connecting Bluetooth Devices - Hisense Sero 8 Pro Manual Del Usuario

5. Follow the instructions to complete the pairing. If prompted, enter a passkey, or refer to
the documentation that came with the device.
If the pairing is successful, your Sero 8 pro connects to the device.

Connecting Bluetooth Devices

Once you've paired with a Bluetooth device, then you can connect to it manually if you want
to switch devices or reconnect after it is back in range.
1. Go to Settings > WIRELESS &
2. In the list of Paired Devices, tap a paired but unconnected device. When the Sero 8 pro
and the device are connected, the device is displayed as connected in the list.
Send Files
1. Make sure Bluetooth is turned on.
2. Press & hold the file you want send, tap
3. Tap the device you want to send it to. The Sero 8 pro begins to send the file.
Tip: You can see the sending status in Notification Tray.
Receive Files
1. Make sure Bluetooth is turned on and visible. To set Visibility timeout, go to
WIRELESS & NETWORKS > Bluetooth > Menu icon > Visibility
2. When the Bluetooth share icon
Tray and tap the notification, follow the instructions to complete the receiving.
3. To check the information of Bluetooth received, go to
> Bluetooth > Menu icon > Show received
Tip: You can see the receiving status in Notification Tray.
Rename or Unpair a Bluetooth Device
You can change the name of the Bluetooth device as it appears on your Sero 8 pro. You can
also unpair a Bluetooth device.
1. Go to Settings > WIRELESS &
2. In the Bluetooth settings, tap the Settings icon
you want to configure.
3. A screen opens that allows you to change the device's name or unpair it.
NETWORKS, make sure Bluetooth is turned on.
share icon
is shows up in Notification bar, open the Notification
files.
NETWORKS, make sure Bluetooth is turned on.
> Bluetooth icon
timeout.
Settings > WIRELESS & NETWORKS
beside the connected Bluetooth device
Making Connections
.
Settings >
16