Kohler K-2238 Manual Del Usurio página 5

Mount hanger Finished Wall
bolts.
Mark anchor
holes.
Apply self-adhesive
pads.
Ridge
Bottom View
Pedestal and Lavatory Placement
of Lavatory
2. Install the Pedestal and Lavatory
CAUTION: Risk of personal injury. Vitreous china is heavy. Do
not attempt to lift or install this product without assistance.
Apply two self-adhesive pads to each of the three ribs on the
underside of the lavatory basin.
Mark the centerline of the pedestal on the floor with a pencil.
Align the center of the pedestal on the marked centerline. The
base of the pedestal must be 3-1/16" (7.8 cm) away from the
finished wall for K-2238 models or 3-1/2" (8.9 cm) for K-2344
models.
Place the lavatory onto the pedestal.
Verify the lavatory is level and flush against the finished wall.
Adjust or add self-adhesive pads as needed.
NOTE: If the bottom of the lavatory contacts the pedestal, reposition
the self-adhesive pads.
Mark the two lavatory anchoring hole locations on the finished
wall with a pencil.
Mark the pedestal anchoring hole on the floor through the hole in
the pedestal bottom.
Remove the lavatory from the pedestal. Set the lavatory aside.
Set the pedestal aside.
Drill 1/4" mounting holes at the marked locations on the finished
wall and the floor.
Kohler Co.
Install faucet and drain.
Install cap nuts
and washers.
Lavatory
Secure pedestal
with wood screws
and washers.
Pedestal
Mark floor
here.
5 1020735-2-C