Celestron ASTRO FI Manual De Instrucciones página 7

GET READY TO OBSERVE
Now that your telescope is assembled and the StarPointer is aligned, let's connect it to your smartphone or tablet. We recommend you
familiarize yourself with the telescope and app during the day before using it at night.
CAUTION:
Remember to never point the telescope at the Sun during the day without using a proper full aperture solar filter!
1. Plug the battery pack into the power port on the base of the telescope. The red WiFi light on the arm will light, indicating power and WiFi-
ready status. Make sure the small switch near the power socket is in the RIGHT position as shown in the fi gure.
2. Go to your device's WiFi settings, and connect to the "Celestron-xx" network. Wait for your device to confi rm that you have
successfully connected.
3. Open Celestron Sky Portal and select "Connect to
Telescope". Arrows will appear on your screen for
UP/DOWN and LEFT/RIGHT.
referred to as altitude and azimuth, respectively.
4. Use the arrows to move your telescope. A slider
will adjust the motor speed.
Start by pointing at distant terrestrial objects. Locate something
with your StarPointer fi rst, then look at the object using the
25mm eyepiece. Switch to the 10mm eyepiece, and notice how it increases the magnifi cation and
decreases the fi eld of view. When you change eyepieces, you may have to readjust the focus slightly
to get the sharpest image.
Now that you are familiar with your telescope, you are ready to begin observing the night sky!
ALIGNING YOUR ASTRO FI
To take full advantage of your motorized Astro Fi, you must fi rst align the telescope with the sky using the Celestron SkyPortal app. Once
aligned, your telescope will automatically locate any celestial object you select on your screen! The telescope also automatically tracks
objects in the sky as the Earth rotates. This keeps objects centered in the eyepiece, and makes it easy to share views with family and friends.
1. Set up your telescope as you did during the day. Make sure your 25mm eyepiece are installed. Set the tripod to a comfortable height
and level it. Plug the battery pack into the power port on the telescope.
2. Connect to the "Celestron-xx" WiFi network. Open the SkyPortal app and confi rm the time and location on your screen. This should
automatically update from your device, but if it does not, you can go into the app settings and update this manually. Select the telescope
icon at on your screen, then press "Connect and Align".
The app will now walk you through each step. Simply follow the on-screen instructions.
TAKE YOUR ASTRO FI OUT FOR A SPIN!
Now that your Astro Fi is aligned, the SkyPortal app will guide you through the universe using its interactive planetarium. Hold your device
up to the sky, and you will easily be able to identify bright stars, constellations, planets and deep space objects outside of our Solar System.
SkyPortal will point your telescope at any of these objects. Simply tap the object on your screen, and select "GoTo. " You can also select
the search icon to enter an object name, such as "Orion Nebula", "Jupiter", or "Pleiades. "
These motions are
A s t r o F i T E L E S C OP E
WiFi switch on right position
ENGLISH | 6