Steam Ironing:
1 . Fill the iron with water as described in these instructions.
2. Plug the appliance into the mains socket.
3. It is necessary to set the thermostat knob to MAX position
for steam ironing. Otherwise, water may leak from the sole
plate.
4. When the indicator light goes off, the correct temperature
has been reached.
5. Set the steam selector appropriately. You can increase
steam output by pushing the steam selector backwards, and
decrease output by pushing the selector forwards.
Caution: You cannot use steam ironing with synthetic
fabric, nylon, synthetic silk and silk. If you do so, it will
damage the finish of the surface.
Steam Burst:
This function works well on tough wrinkles and heavy fabrics.
Press the Burst button to produce an intense burst of steam
from the sole plate. This can be very useful for removing
stubborn creases. The steam burst function can be used only
when ironing at high temperature. To prevent water leakage
from the sole plate, do not press the Burst button continuously
for more than 5 seconds, and allow at least one minute interval
before applying the steam burst to the same area.
Vertical Steam:
A steam burst can also be produced when the creases from
hanging clothes, curtains, etc. iron is held in the vertical position.
This is useful for removing
Spraying Methods:
At any temperature you can damp down the item being ironed