Main Data In Memory; Program "Caminho Da Escola - VDO BVDR Manual De Instrucciones Del Usuario

1.3 Main data in memory

Driver registration code
BVDR has a maximum capacity of 50 d
Driver's License. It's a circular memory and the inclusion of the 51th driver
codes overwrites the driver code that has stopped using the vehicle for longer.
For more information, check the item 2.4.1.
Driver identification
Every driver, before starting their journey, must be identified. For more
information, see item 2.4.4.1.
Speed and distance traveled
The speed and distance information are stored in memory and can be verified
in the following ways:
•
Speed verification and total odometer on the main screen;
•
Making the printing of report in VDO paper;
•
Viewing the electronic file extracted from the BVDR.
Error log
When a serious failure or momentary error occurs, it will be recorded on the
BVDR memory with the code, date and time of the failure.
Calibration parameters
Some parameters such as chassis of the vehicle, k-factor, vehicle plate and
speeding limit are metrologically controlled by Inmetro or other local metrology
agency and therefore are subject to periodic checks by competent authorities.

1.4 Program "Caminho da Escola"

The BVDR can be configured to meet the Brazilian Government program
"Caminho da Escola". In this configuration the behavior of the display
illumination with the switch in off, will follow as below:
- After 30 seconds with power switch turned off, the Power Saving Mode
and the display illumination is switched off (0% background illumination), but
the display segments are kept lit.
Issue 10/2019
river codes
It is not possible to sign in more than 1 driver at the
same time. The last 3 drivers identified in the last 24
hours are displayed in the printout.
© Continental Automotive
and their respective National
starts
85