Introduction; Intended Use; Depicted Components; Package Contents - Parkside PBH 1500 E5 Traducción Del Manual De Instrucciones Original

HAMMER DRILL PBH 1500 E5

Introduction

Congratulations on the purchase of your
new appliance . You have selected a high-
quality product . The operating instructions
are part of this product . They contain important
information about safety, usage and disposal .
Before using the product, please familiarise your-
self with all operating and safety instructions . Use
the product only as described and for the range
of applications specified . Please also pass these
operating instructions on to any future owner .

Intended use

The PBH 1500 E5 hammer drill (hereinafter
appliance) is suitable for:
▯ Hammer-drilling into brickwork, concrete and
stone
▯ Chiselling into concrete, stone and plaster
▯ Drilling into stone, wood and metal
Any other usage or modification of the appliance
is deemed to be improper and carries a significant
risk of accidents .
The manufacturer accepts no responsibility for
damage(s) attributable to misuse . The appliance is
not intended for commercial use .

Depicted components

Function selector switch
Function selector release button
ON/OFF switch
Red LED
Green LED
3a
Speed preselector dial
Additional handle
Tool holder with dust protector cap
Locking collar
Wing screw
Depth stop
Wheel-rim chuck
Chuck key
Face spanner
Hammer drill housing cover
■ 36 │ GB │ MT

Package contents

1 hammer drill PBH 1500 E5
1 additional handle
3 SDS drill bits (see fig . B)
1 flat chisel (see fig . B)
1 pointed chisel (see fig . B)
1 metal depth stop
1 wheel-rim chuck for straight shank drill bits
(see fig . A)
1 chuck key (see fig . A)
1 face spanner (see fig . C)
1 carrying case
1 set of operating instructions

Technical details

Nominal power input:
Nominal voltage:
Idle speed:
Stroke rate:
Impact energy:
Max . drill diameter:
Protection class:
Noise emission value:
Noise measurement value determined in accordance
with EN 60745 . The A-rated noise level of the power
tool is typically as follows:
Hammer drilling:
Sound pressure level:
Uncertainty K:
Sound power level:
Uncertainty K:
Chiselling:
Sound pressure level:
Uncertainty K:
Sound power level:
Uncertainty K:
Guaranteed sound power level
L in dB .
WA
1500 W
230 V ∼ 50 Hz
(AC)
n 0–800 rpm
0
0–3900 bpm
5 J
13 mm for steel
40 mm for wood
32 mm for concrete
II / (double insulation)
L = 91,7 dB (A)
pA
3 dB
L = 102,7 dB (A)
WA
3 dB
L = 89,7 dB (A)
pA
3 dB
L = 103,7 dB (A)
WA
3 dB
PBH 1500 E5