Do not apply pressure on the open door.
5
Do not use the appliance as a work surface or as a storage surface.
5
Installation
All installation must be carried out by a competent person or qualified electrician. Before connecting to the mains supply ensure that
the mains voltage corresponds to the voltage on the rating plate.
This appliance is supplied with a fitted plug suitable for use in your country.
The cable must not be bent or compressed.
Regularly check the power cord for damage.
WARNING: This is a Class I appliance and MUST be earthed.
This appliance is supplied with a 3 core mains cable coloured as follows:
Brown = L or Live
Blue = N or Neutral
Green and Yellow = E or Earth
The replacement fuse must be rated at 13 Amps (UK only).
To avoid the risks that are always present when you use an electrical appliance it is important that this appliance is installed
correctly and that you read the safety instructions carefully to avoid misuse and hazards. Please keep this instruction booklet for
future reference and pass it on to any future owners. After unpacking the appliance please check that it is not damaged. If in doubt,
do not use the appliance but contact Customer Services.
The manufacturer declines all liability for damage caused to persons and objects due to incorrect or improper installation of the
appliance. Any permanent electrical installation must comply with the latest wiring regulations applicable to your country and for your
own safety a qualified electrician or contractor should undertake the electrical installation.
Technical data
Model Number
Voltage Input
Power Output
Power Consumption
Operating Frequency
Exterior Dimensions
Cavity Dimensions
Capacity
Trouble shooting
WARNING: Microwave started with nothing in the cavity
Radio interference
Oven light dims during use
GALA11164 Microwave SM BI R.indd 7
BIMW20LUK
AC 230V~50Hz
ISSUE
800W
1200W
2450MHz
389mm x 594mm x 370mm
210 mm x 315 mm x 329 mm
20 Litres
SOLUTION
Stop the microwave immediately as this is dangerous and a
safety issue!
Operation of a microwave oven can cause radio wave
interference with other devices operating in its vicinity
such as radio, television, wi-fi, wireless telephones and
similar equipment.
You can reduce or minimize the interference by:
1. Relocating the microwave in relation to the other devices.
2. Changing the orientation between the microwave and the
other devices.
3. Ensuring the microwave and other devices are plugged into
separate ring mains or circuits.
This is normal, the light output may change dependent upon
the power level used.
BIMW20LEU
AC 230V~50Hz
10/10/2018 10:30