MHZ PowerView Surface Kit Guía Rápida página 21

Venetian blinds Programming Guide
PowerView® I
Set end positions (set top/bottom end position)
1 2
Top end position
Press Motor button and keep pressed.
Additionally, press
1
button
Make sure that the
desired channel button has been
selected on the remote control.
Blind briefly moves up and down once.
Release Motor button.
Using the Move buttons,
position the blind about 20 cm
below the head rail.
Press OPEN button to move
the unit up to the head rail.
Motor stops automatically
Using the Move buttons, move the blind into the desired
top/bottom end position.
Bottom end position
Open Additionally, press
2
button
Release
Motor button.
EN
Close
21