Taurus Alpatec Ponent 16CR Elegance Manual Del Usuario página 9

- The appliance is not suitable for outdoor use.
- Supply cord should be regularly examined for
signs of damage, and if the cord is damaged,
the appliance must not be used.
- Do not use or store the appliance outdoors.
- Do not leave the appliance out in the rain or
exposed to moisture. If water gets into the appli-
ance, this will increase the risk of electric shock.
- Do not touch the plug with wet hands.
- Do not touch any of the appliance's moving
parts while it is operating.
USE AND CARE:
- Fully unroll the appliance's power cable before
each use.
- Do not use the appliance if the on/off switch
does not work.
- Use the appliance handle/s, to catch it or move it.
- Do not use the appliance if it is tipped up and do
not turn it over.
- Do not turn the appliance over while it is in use
or connected to the mains.
- Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
- This appliance is for household use only, not
professional, industrial use.
- Store this appliance out of reach of children
and/or persons with physical, sensory or
reduced mental or lack of experience and
knowledge.
- Make sure that dust, dirt or other foreign objects
do not block the fan grill on the appliance.
- Keep the appliance in good condition. Check
that the moving parts are not misaligned or
jammed and make sure there are no broken
parts or anomalies that may prevent the appli-
ance from operating correctly.
- Never leave the appliance connected and un-
attended if is not in use. This saves energy and
prolongs the life of the appliance.
SERVICE:
- Any misuse or failure to follow the instructions
for use renders the guarantee and the manufac-
turer's liability null and void.
DESCRIPTION
1 Grill panel
2 Front grill
3 Propeller fastening nut
4 Propeller
5 Grill fastening nut
6 Rear grill
7 Motor shaft
8 Motor shaft pin
9 Motor housing
10 Oscillation knob
11 Speed buttons
12 Locknut for control box
13 Lift pole
14 Adjustable height knob
15 Adjustable height column
16 Base
17 Nut base
If the model of your appliance does not have the
accessories described above, they can also be
bought separately from the Technical Assistance
Service.
INSTALLATION
- Be sure to remove all packaging material from
inside the appliance.
- Ensure that the fan is switched off from the
supply mains before start any installation or
assembly operation.
- The appliance should be used with its base
fitted.
ASSEMBLING THE BASE:
- To fix the base into the appliance, place the
appliance face down.
- Fit the base on the main body of the appliance.
- Fix the base using the screw provided (Fig. 1).
- Stand the appliance up again so as to check
that the base works properly.
- Fix the lift pole (13) with the main body through
the locknut for control box (12). It is not neces-
sary to screw to the maximum.
ASSEMBLING THE GRILL AND THE PROPEL-
LER:
- Fit the rear grill (6) on the motor housing (9),
matching their fitting points.
- Tight the grill nut (5) that attaches the grill, Make
sure of a correct setting.
- Fit the propeller (4) On the motor shaft (7).
- Tight the nut (3) that attaches the propeller,
Make sure of a correct setting.
- Fit the front grill (2) front the rear grill (6), match-
ing the security screw position. Fix the front grill
by using the hooks and tight the security screw
by using a screwdriver.
- Check the correct rotation of the propeller.