Fleck 3200 ET Manual De Uso página 29

E
N
G
L
I
S
H
28
3 - PROGRAM LEVEL #2
Note:
1. Push the button once
per display.
2. Option settings may be
changed by pushing the
and set buttons.
3. Depending on current
valve programming, some
displays will not be viewed
or set.
(1) The unit of measure depends on the
display format chosen. All examples
above are based on the cubic meter
format. (see point 2.12).
The valve is in service position. To enter in the second
P
level, push and hold the
Then press the button
You are in the second level.
2.1. Flow rate (Fr) in l/min
P
Ex.: 8,6 l/min
2.2. Days since the last regeneration (d)
P
Ex.: 2 days
2.3. Prior service volume used in m
Ex.: 58,6 m 3
P
2.4. Reserve capacity (rc) in m
P
Ex.: 24,6 m 3
2.5. Previous days water usage (Pd) in m
P
Ex.: 28,4 m
3
2.6. Indicator of chlorination (J)
P
Ex.: - Chloration during the cycle 2
- No chloration
2.7.a. Start time of relay #1 (y)
P
Ex.: - Turn on at the start of Backwash.
- Cancel setting
2.7.b. End time of relay #1 (y)
P
Ex.: - Turn off after 10 min
- Turn off when back to service
2.8.a. Start time of relay #2 (r)
P
Ex.: - Turn on 10 min after start
Backwash
- Cancel setting
Note: setting not viewed if relay #1 is cancelled.
2.8.b. End time of relay #2 (r)
P
Ex.: - Turn off after 60 min
- Turn off when back to service.
button for 5 seconds.
for 5 seconds.
(1)
non adjustable [Fr - - 8.6]
non adjustable [d - - - -2]
3 (1) (E)
non adjustable [E - - 58.6]
3 (1)
non adjustable [rc - - 24.6]
3 (1)
non adjustable [Pd - - 28.4]
[J - - - - -2]
[J - - -OFF]
[y - - - - 0]
[y - - - OFF]
[- - - - 10.0]
[- - - - - - S]
[r - - - - 10]
[r - - - OFF]
[- - - - - 60]
[- - - - - - S]
3200 ET & RM