Opening the Paper Roll Cover
If you open the cover of an autocutter-equipped printer except to
install a paper roll, be sure to follow the steps below to prevent a
paper jam.
1. Feed the roll paper approximately 50 mm (1.97").
2. Cut the paper with the manual cutter.
3. Close the cover.
without an autocutter
Installing the Paper Roll
Note:
Do not use paper rolls that have the paper glued or taped to the core
because they might cause a paper jam.
You need to install a paper roll even if you are using only the slip or
validation sections of the printer.
with an autocutter
TM-U675/TM-U675P User's Manual 5
English
➁
➀