Set Volume Level; Backlight; Reset System; Safety And Care - Oregon Scientific BAR321 Manual Del Usuario

OPTION
DESCRIPTION
1 Hour The Broadcast will sound once hourly
between the specified times. For
example, if you selected 6 PM as the
start time, and 8 PM as the end time,
the Broadcast will sound at 6PM, 7PM,
and 8PM.
24 Hour The Broadcast will sound once a day
at the selected start time

SET VOLUME LEVEL

After setting the broadcast mode, you can set the volume
level. There are 3 volume levels: Low, Medium and High.
The levels are set in Clock Mode after you select the
broadcast times.

BACKLIGHT

Press SNOOZE / LIGHT to illuminate the backlight for
5 seconds.

RESET SYSTEM

The RESET button is located at the bottom of the unit.
Press RESET when you change the batteries and
whenever performance is not behaving as expected (for
example, unable to establish radio frequency link with
remote unit or radio-controlled clock).
NOTE
When you press RESET, all settings will return
to default value, and you will lose all stored information.

SAFETY AND CARE

Clean the unit with a slightly damp cloth and alcohol-
free mild detergent. Avoid dropping the unit or placing it
in a high-traffic location.

WARNINGS

This product is designed to give you years of service if
handled properly. Observe the following guidelines:
• Never immerse the unit in water. This can cause
electrical shock and damage the unit.
• Do not subject the main unit to extreme force,
shock, or fluctuations in temperature or humidity.
• Do not tamper with the internal components.
20