General Safety Instructions - LaserLiner VideoFlex G4 Manual Del Usuario

Completely read through the operating instructions, the „Warranty and Additional Information"
!
booklet as well as the latest information under the internet link at the end of these instructions.
Follow the instructions they contain. This document must be kept in a safe place and passed on
together with the device.
Function / Application
This professional video inspection system VideoFlex G4 combined with an exchangeable camera unit is
suitable for easy visual inspection of hard-to-reach places in pipes, cavities, shafts, masonry and motor
vehicles. Images and videos can be stored on the SDHC memory card for analysis and documentation.

General safety instructions

– The device must only be used in accordance with its intended purpose and within the scope of
the specifications.
– The measuring tools and accessories are not toys. Keep out of reach of children.
– The structure of the device must not be modified in any way.
– Do not expose the device to mechanical stress, extreme temperatures, moisture or significant vibration.
– The device must no longer be used if one or more of its functions fail or the battery charge is weak.
– When using the device outdoors, make sure that the weather conditions are appropriate and/or that
suitable protection measures are taken.
– The LCD unit must not be immersed in water. The base unit must not come in contact with liquids.
– It is absolutely vital to ensure that the VideoFlex G4 does not come into contact with chemicals,
voltage, moving or hot objects. This can damage the device and put its user at risk of serious injury.
– The VideoFlex G4 must not be used for medical examinations / examining people.
– Please ensure compliance with the safety regulations set out by local and national authorities with
regard to the correct and proper use of the device.
– The unit is not suitable for taking measurements close to dangerous voltages. Therefore always make
sure that conductive parts are at zero potential when carrying out measurements in the vicinity of
electrical systems. Safe isolation from the power supply and precautions to prevent systems being
switched on again must be ensured by implementing suitable measures.
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic compatibility regulations and limit values in
accordance with EMC-Directive 2014/30/EU.
– Local operating restrictions – for example, in hospitals, aircraft, petrol stations or in the vicinity of people
with pacemakers – may apply. Electronic devices can potentially cause hazards or interference or be
subject to hazards or interference.
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents, scouring agents and solvents.
Remove the battery(ies) before storing for longer periods. Store the device in a clean and dry place.
VideoFlex G4 VideoFlex G4
EN
11