Aprimatic T4-PROFESSIONALE Instrucciones Para La Instalación página 11

• The manufacturer's instructions must be strictly observed.
• The installer must check the installation and the correct functioning of the device.
• The product must not be used incorrectly or for purposes that are not envisaged.
• The product must not be tampered with or modified in any way.
• Always use original spare parts.
• Cordon off the working area to prevent the access of unauthorised persons.
• Ensure that the working area is clear of obstacles and the floor is not slippery.
• All equipment used must be in good working condition.
• The working area must be sufficiently well lit and free of health hazards.
• Unauthorised persons must not enter the working area.
• The working area must not be left unattended.
This manual was drawn up by the manufacturer and is an integral part of the product.
The information it contains is addressed to expert operators that carry out the installation and
extraordinary maintenance. They must have the specific qualifications and training to carry out
the operations assigned to them correctly and under the maximum safety conditions. Strict
observation of the instructions contained in the manual will ensure safety, optimum operation and
prolonged functioning of the product. To avoid incorrect manoeuvres and the consequent risk of
accidents, it is important to read this manual carefully, strictly observing the instructions given.
Equipment for Aprimatic swing gate operators.
1. DESCRIPTION ................................................................................................................. 6
1.1 Block diagram of equipment ................................................................................... 6
2. INSTALLATION ................................................................................................................. 6
2.1 Preparation ............................................................................................................ 6
2.2 Assembly ................................................................................................................ 6
2.3 Electrical connections ............................................................................................ 6
3. START-UP ......................................................................................................................... 6
3.1 Functioning tests .................................................................................................... 6
3.2 Adjustments ........................................................................................................... 6
3.3 Operating programming ......................................................................................... 7
3.4 Settings/selections ................................................................................................. 7
4. FUNCTIONING CONTROL .............................................................................................. 7
4.1 Checking functioning of the external devices ......................................................... 7
5. OPTIONAL CARD CONNECTION ................................................................................... 8
5.1 ES card for one-way traffic light ............................................................................. 8
Aprimatic S.p.A. • Zona Industriale Fossatone
40060 Villa Fontana • Medicina • Bologna (ITALY)
tel. +39-051.6979511 • fax +39-051.6930396