Infrared motion sensor
KDP-DC2
0767965
Manual
Welcome to use Infrared motion sensor!
This product is a new type of energy-saving lighting switch, it
adopts high sensitivity detector, integrate circuit and SMT; It gathers
automatic, convenient, safe, energy-saving, practical functions; It
has wide detection range made up of up and down, left and right
service field; It utilizes human motion infrared rays as control signal
sources, when one enters the detection field, it will start the
controlled load at once; It can identify day and night automatically;
It is easy to install and its usage is wide; It has the function of power
indication and detection indication.
SPECIFICATION:
Power Source: 24V/AC
Detection Distance: 12m max (24℃)
Ambient Light: <10-2000LUX (adjustable)
Time-Delay: min: 10sec±3sec
Max: 7min±2min
Rated Load:100W (incandescent lamp)
100W (energy-saving lamp or LED ) Detection Motion Speed: 0.6 ~1.5m/s
FUNCTION:
➢ Detection field: The wide detection range is made up of up and down, left and right (see the
following diagram), the detection range could be adjusted according to your desire, but the
moving orientation in detection field has great relation with the sensitivity.
➢ Identify day and night automatically: The ambient light could be adjusted according to your
desire: when turn to SUN (max), it will work day and night, when turn it to MOON (min), it will
only work in the ambient light less than 10LUX. As for adjustment, please refer to testing
way.
➢ Time-delay is added continually: When it receives the second induction signals after the first
induction, it will compute time once more on the rest of the first time-delay basis (set time).
➢ Time-delay is adjustable: It can be set according to your desire, the minimum is
10sec±3sec,the maximum is 7min±2min.
Detection Range: 360°
Working Temperature: -20℃~+40℃
Working Humidity: <93%RH
Installation Height: 2.2-4m
Power Consumption: <0.9W (work)
<0.9W (static)