Troubleshooting - Samsung POWERbot SR2AH905 Serie Manual Del Usuario

troubleshooting

Symptom
the PoWERbot does not
work at all.
the PoWERbot has stopped
during cleaning.
Suction power is weak.
the PoWERbot cannot find
the docking station.
Side brush does not work.
the PoWERbot suddenly
cleans diagonally.
fCheck if the emergency switch is on.
fCheck if all the icons are displayed on the display panel.
fCheck if the POWERbot's battery is depleted.
- When "Lo" is displayed, carry POWERbot to the docking station to
charge it.
fReplace the batteries (AAA type) if the remote controller is not working.
fWhen "Lo" is displayed on the display panel, carry POWERbot to the
docking station to charge it.
fWhen POWERbot is immobilized by an obstacle such as a cord,
threshold etc, pick it up and move it away from the obstacle.
- If any fabric or string is caught in a drive wheel, turn off the emergency
switch and remove the fabric or string before using it again.
fIf the "Filter inspection indicator" is on, turn off the emergency switch
and clean the dustbin.
fWhen there's too much dust in the dustbin, suction power may get
weakened. Turn off the emergency switch and empty the dustbin.
fIf the intake (on bottom of POWERbot) is blocked by foreign matter,
turn off the emergency switch and remove foreign matter from the
intake.
fWhen noise suddenly increase, turn off the emergency switch and
empty the dustbin.
fPress the Turbo button on the remote control to obtain increased
suction power.
fCheck if there's a power failure or whether the power plug is
unplugged.
fRemove any obstacles around the docking station that may prevent
POWERbot from returning to the docking station.
fWhen there's foreign matter on the charge pins, charging can be
affected. Clean the foreign matter off the pins.
f Side brush operates when the POWERbot approaches a wall or
obstacle.
✻ ✻ If the POWERbot approaches a wall or obstacle but the side brush
does not work, remove all foreign matters from the side brush.
fCheck if the docking station is installed along the grain of wooden
floors or tiles.
fThe POWERbot may clean in a diagonal direction if it is moving to
another area using the shortest route. It may also move at a diagonal if
it made contact with an obstacles at that angle, if it was charged at the
charger at an angle, or if the grain of the wooden/tile floor skewed is in
that direction.
ENGLISH-25
checklist