Basic Configuration; Finding The Datalog Cs-Bs-1 By Means Of The Devicediscoverytool; Changing The Web Interface Language; Changing The Display - oventrop Datalog CS-BS-1 Manual De Uso E Instalación

6 Basic configuration
The basic configuration does not require detailed knowledge about the solar ther-
mal system or the network environment and can be carried out using the guidelines
in this manual.
In order to carry out the basic configuration, proceed as follows:
Î Finding the Datalog CS-BS-1 by means of the DeviceDiscoveryTool.
Î Changing the web interface language.
Î Changing the Live data screen language.
Î Changing the user password.
Î Changing the device name.
Î Changing the time configuration.
Î Configuring automatic firmware update configuration.
Î Changing the remote access password.
6.1

Finding the Datalog CS-BS-1 by means of the DeviceDiscoverytool

The DeviceDiscoveryTool is a software that displays products that are connected
directly via the local network.
Note
The factory setting for both user name and password is admin.
Starting the DeviceDiscoverytool
All LAN-enabled products found are displayed.
Î Click the Datalog CS-BS-1 to mark it, then click the Open button.
A new window opens.
Î Enter user name and password.
The factory setting for both user name and password is admin.
The home screen of the Datalog CS-BS-1 web interface opens.
26
6.2

Changing the web interface language

The web interface can be run in different languages.
Î Click one of the small flags on the right-hand side of the Home screen, accor-
ding to the desired language:
• German
• English
• French
• Spanish
• Italian
The message Language selection successful! appears.
6.3

Changing the display

In order to select the language of the web interface, proceed as follows:
Î In the main menu Device Config, select the sub-menu General.
Î On the General Configuration tab, in the dropdown menu Default Lan-
guage, select one of the following languages:
• German (de)
• English (en)
• French (fr)
• Spanish (es)
• Italian (it)
Î Click Save configuration.
The message Configuration saved successfully! appears.