Arrow GEPK532 Guia

FASTENING EYELETS IN 4 EASY STEPS
STEP 1
Punch hole in your material where you want the eyelet to go.
STEP 2
Push eyelet through the hole that you made. The flat part of
the eyelet should be on the good side of the material.
STEP 3
Align your eyelet pliers. The flat side of the eyelet should
sit flush on the flat/curved side of the pliers and the eyelet
stem should be facing up in alignment with the pointed side
of the pliers.
STEP 4
Press eyelet plier handles together to set eyelet in material.
PRODUCT WARNINGS:
Wear Safety Goggles. The failure to do so may result in personal injury. To avoid personal injury, always wear OSHA/ANSI approved
eye protection (goggles, face shield) when using tools.
WARNING! This product contains one or more chemicals known to the state of California to cause birth defects and other reproductive harm
and/or cancer.
These tools are not intended for extensive commercial or industrial use. Using them in this manner for an extensive period may result in
property damage or personal injury.
Manufacturer assumes no responsibility for any product failure due to improper use or use inconsistent with these instructions.
Made in China
©2017 Arrow Fastener Co., LLC
Arrow and GEPK532 are trademarks of Arrow Fastener Co., LLC
GEPK532
EYELET PLIERS GUIDE
• For setting small eyelets in leather, plastic, rubber, canvas and cardboard.
• Used to reinforce holes in leather, cloth, shoes, canvas and other fabrics.
• Great for do it yourself projects or crafting.
• Heavy duty, spring-tension pliers for quick action open and release.
• Non-slip grip rubber handles for comfort and control.
• 100 multi-colored 5/32" (4mm)
diameter opening eyelet assortment.
TM
Eyelet colors:
Silver Gold Bronze
Arrow Fastener Co., LLC
271 Mayhill Street, Saddle Brook, New Jersey 07663
www.arrowfastener.com