Safety Instructions - IFM Electronic efector 110 GI5002 Instrucciones Operativas

1. Safety instructions

Follow the operating instructions.
Non-observance of the instructions, operation which is not in
accordance with use as prescribed below, incorrect installation
or handling can affect the safety of people and equipment.
For mounting and prescribed use of the product the notes in
the operating instructions must be carefully observed and the
applicable technical standards relevant for the application
have to be considered.
In case of non-observance of notes or standards, specially
when tampering with and/or modifying the product any lia-
bility is excluded.
The unit must be installed, connected and put into operation
by a qualified electrician trained in safety technology.
After installation of the system a complete function check
must be carried out.
Disconnect the device externally before handling it. Also dis-
connect any independently supplied relay load circuits.
For installation the requirements according to EN 60204 must
be observed.
In case of malfunction of the unit please contact the manufac-
turer. Tampering with the device can seriously affect the safe-
ty of people and equipment. This is not permitted and leads
to an exclusion of liability and warranty.
11