Adjustment Of Rear Brake - Serpento COYOTE 250 Manual De Usuario

Adjustment of Rear Brake

The vehicle should be supported by the main stand for check.
(1) The rear brake pedal has a free operating movement of 20-30mm as shown in the figure on the right side.
(2) To make adjustment, turn the rear brake adjusting nut clockwise to reduce and counterclockwise to increase the free operating movement
of the brake pedal
(3) After adjustment, the groove of the adjusting nut should be aligned with the pin of the brake arm.
Caution:
After regulation, check the rear braking system, The braking light should be lit on time when the rear brake is applied by stepping
down the brake pedal.
Rear brake pedal Brake pull rod Brake cam
Rear brake arm
20-30mm Adjusting nut Brake arm pin
24